|
|
Signature Series 383
Stroker![]()
This 383 Chevy Stroker Will Produce Over 550HP
This Engine Will Replace Any Small Block Chevy Engine With Hood Modification
A Roller 4 Bolt Main Block "Painted Color Of Choice"
Block Will Be Bored And Plate Honed Accordingly
Block Will Be Decked And Align Honed
Block Will Have Installed New Cam Bearings , Freeze Plugs, and Oil Galley Plugs
New Steel Stroker Crank Assembled W/Tri Metal Clevite 77 Rod And Main Bearings
A Set Of New High Performance H-Beam Connecting Rods W/ARP Rod Bolts (Good For Over 700 HP)
A New Set Of Performance SRP (Sportsman Racing Products) Forged Aluminum Pistons Set To 0 Deck Height
Assembled With A Set Of Hand Filled Performance Rings
A New Three Piece True Double Roller Timing Set
A Brand New Crane Performance Camshaft (Hydraulic Roller)
A Set Of 16 New Roller Lifters
A Set Of New Dart Aluminum Performance Cylinder Heads W/ (215cc Runners)
A New Set Of (8) 2.055 Stainless Steel Intake Valves
A New Set Of (8) 1.6 Stainless Steel Exhaust Valves
A New Set Of (16) Valve Springs 1.440 O.D. Double With Damper
A Set Of Machined 4140 Chrome Moly Retainers
Heads Will Be Assembled With Posi-Teflon Seals
Heads Will Have All New Screw In Studs And Guide Plates
A Set Of (16) New Chrome Moly Push Rods
A Set Of New Performance True Aluminum Roller Rockers 1.6 Ratio
Engine Will Be Assembled With All Brand New Bolts
A New High Volume Oil Pump And Screen
New Aluminum Oil Pan
A New Chrome Dip Stick And Tube
A New Aluminum Timing Cover
A Brand New Performance Balancer
A New Edelbrock Street Tunnel Ram Intake Manifold
A New Chrome Thermostat Housing
A New Set Of Edelbrock 500CFM Carburetors (W/Electric Choke)
New Edelbrock Throttle Linkage To Match Carburetors
A Set Of New Chrome Air Cleaner
A New High Performance HEI Distributor W/ 53,000 VoltCoil
A Set Of 8 AC Delco Spark Plugs
A Set Of Taylor 8mm Custom Fit Ignition Wires (Color Of Choice)
New Fuel Pump W/Inline Filter
A Brand New High Flow Cast Iron Water Pump
A Set Of Tall Edelbrock Signature Series Chrome Valve Covers
A Set Of Fel-Pro Performance Gaskets
All Engines Will Come With Starter And Flex Plate
Complete Rotating Assembly Will Be Balanced And Blue Printed
Engine Will Be Live Run Tested and Dialed In
When You Place A Order We Will Send You Several Pictures Via E-Mail As We Assemble Your Engine, So You Can See The Quality Of The Parts And Workmanship That Goes Into Building Your Engine.
Turn-Key
Unit Only $11,800![]()
Recommendations:
Larger Then Stock Stall Speed Converter
Rear 3.70:1 And Higher
Headers
Hood Modifications May Be Required
Click Here To Receive More Information By E-Mail
Major Credit Cards Accepted
![]()
Call Toll Free 24 Hrs. 1-800-267-3940
International +1-732-695-2520
Fax 1-732-695-2525
E-Mail: info@Pro-formanceunlimited.com